Environmental certification pictogram
Protective products

Imprasol

sku 175001 pc. = 10 l
Impregnation for porous stone surfaces – protects while preserving the natural appearance.

 

 

• Preserves the floor's natural appearance
• Colorless to slightly yellowish / transparent
• does not form a film
• reduces the penetration of water, oil, and dirt
• protects against staining from liquids
• vapor-permeable / substrate remains breathable
• UV-resistant
• makes cleaning easier
• very low-emission formulation (EMICODE EC1 Plus formulation)
• Spot repair / restoration of partial areas / touch-ups on walkways possible
• Can be largely removed through deep cleaning

To the webshop
Product overviewApplications & MethodsTechnical data

Applications & Methods

  • Coating

  • Hard Floor

Technical data

Kunst-/ Naturstein, mineralische Beläge & Oberflächen

  • Asphalt/mastic asphalt
  • Benton stone/terrazzo
  • Hard stone wood
  • Natural stone acid-resistant (granite, quartzite, gneiss, porphyry)
  • Acid-sensitive natural stone (marble, slate, Jura, shell limestone, Solnhofen slabs, travertine)
  • Clay tiles, terracotta porous/absorbent
  • Cement coating, cement screed (underlay floor)

pH value (Concentrate)

  • -

Important ingredients

  • Hydrophobic compounds
  • Preservatives

Main application

  • Protective treatment

Sales unit

  • 1 pc. = 10 l

Properties

  • • Preserves the floor's natural appearance
    • Colorless to slightly yellowish / transparent
    • does not form a film
    • reduces the penetration of water, oil, and dirt
    • protects against staining from liquids
    • vapor-permeable / substrate remains breathable
    • UV-resistant
    • makes cleaning easier
    • very low-emission formulation (EMICODE EC1 Plus formulation)
    • Spot repair / restoration of partial areas / touch-ups on walkways possible
    • Can be largely removed through deep cleaning

Application

  • For waterproofing natural and artificial stone flooring
  • For treating porous, highly absorbent flooring (clay tiles, sandstone, terracotta, marble, clinker, slate, etc.)
  • good for people and the environment—EMICODE EC1 Plus formula (very low emissions)

Please note

  • Apply to a thoroughly cleaned and completely dry surface (no pre-treatment with a pore filler is necessary)
  • Use only on absorbent surfaces
  • Shake well before use
  • Not suitable for water- and moisture-sensitive floor coverings (e.g., anhydrite), outdoor areas, and wet zones
  • Apply at temperatures between 5–30 °C and 30–70% relative humidity

Good to know

  • Effective deep within the floor (no film formation on the surface)
  • Test on an inconspicuous area before use, as the color may change slightly
  • Coverage: 20–50 g/m2 per coat (depending on the absorbency of the substrate)
  • At least 5 hours drying time
  • The substrate remains breathable (vapor-permeable)

Haftungsauschluss

Wetrok AG shall have no liability whatsoever for damage caused by incorrect use. Observe special cleaning and care instructions from the floor covering manufacturer.