Damp wipe with a bucket

Remove loose and adhering dirt from the entire surface with the damp cleaning textile. The surface is dry immediately.

01

Preparatory work

  • Select the appropriate products according to the surface to be cleaned (type / square meter) and soiling.

  • Put up the warning sign.

  • Pour the cleaning agent into the bucket according to the dosage instructions.

02

Main work

  • Moisten the folded cleaning cloth with cleaning solution and wring out very well.

  • Use the folded cloth to wipe the surface with a damp cloth. Change the dirty cloth surface in good time.

  • Change the dirty cloth surface in good time.

  • Perform the control view.

03

Final work

  • Remove the warning sign.

  • Dispose of the waste.

  • Wash the used cloths in the washing machine.

  • Clean the cleaning material and replace if necessary.

04

Comments

  • Wear the protective equipment (PPE) required in accordance with the company regulations, safety data sheet or operating instructions.

  • Always check in advance which product meets your requirements (see Wetrok cleaning and care instructions).

  • Wetrok AG accepts no liability for damage caused by improper use or incorrect product selection.

Download method as PDF
  • Brush vacuum cleaning

  • Coating - Protective treatment

  • Damp wiping with ready-to-use disposable cloths

To the method overview