Wet mopping – single work step (direct method) with ready-to-use disposable mops (quick system)
Removing easily removable soiling from smooth floor coverings in a single work step using a pre-wetted mop and the wet mopping unit in a combination of mechanic and chemical methods. Suitable for water-resistant, non-textile floor coverings. The remaining moisture on the floor dries quickly. The floor covering is free from easily removable soiling. Uniform, clean appearance.
Preparatory work
Select suitable products to match the surface to be cleaned (type and size) and the type of soiling.
Provide a sufficient number of ready-to-use disposable mops in their packaging.
Put up the warning sign.
Remove any loose dirt. Perform dust-binding mopping.
Main task
Take a pre-wetted disposable mop from the packaging, place it on the floor in the room and position the wet mopping unit with the micro hook-and-loop sole on top of it.
Start along the edges of the room and under furniture, then use the moistened mop and the wet mopping unit to mop the open space in slightly overlapping passes.
Change the mop when it gets dirty and dispose of it. Continue with step 1 of the main task until the entire area is clean.
Lift up the wet mopping unit and remove the disposable mop from the wet mopping unit. Gather the dirt and the disposable mop using the dustpan and brush and dispose of the waste.
Perform a visual check.
