Wet scrubbing – manual, using a pad (attached to a cleaning tool)

Select the appropriate products according to the surface to be cleaned (type and m²) and the level of soiling.

Put up the warning sign

Fill the bucket, pressure foam sprayer (hand-operated pressure foam sprayer) or foam dispenser with the cleaning agent according to the dosing instructions.

Remove loose dirt.

Dust mop smooth floor coverings.

Dry vacuum lightly textured floor coverings.

Rinse walls with water, e.g. in showers, bathrooms and kitchens.

Moisten the pad with the cleaning solution and wring it out lightly if necessary, or apply cleaning foam to the walls.

Allow the cleaning solution or cleaning foam to take effect, but do not let it dry.

For floor or wall cleaning, attach the pad to the edge-cleaning or handheld edge-cleaning tool and wet scrub the surface.

Rinse out the soiled pad in good time or replace it if necessary. 

In cases of very heavy soiling, rinse the surface with water or wipe it with a damp or wet mop.

If necessary, repeat steps 1 to 5 of the main cleaning procedure.

Remove the dirty cleaning solution (dissolved dirt and cleaning solution) using a wet vacuum cleaner or a foam rubber squeegee. Replace the soiled mop in good time.

Rinse the surface thoroughly with water or a wet cleaning textile.

Remove the dirty cleaning solution using a wet vacuum cleaner, a foam rubber squeegee or a dry mop. Replace the soiled mop in good time.

Perform a visual inspection.

Remove the warning sign as soon as the surface is dry.
 

Rinse the used pads (Maxi-Pads and Microsol fibre pads) thoroughly. Wash pads and cloths separately in the washing machine.

Rinse the used melamine cleaning pads thoroughly and allow them to dry.

Dispose of the waste.

Clean the cleaning equipment and replace it if necessary.