
Damp wipe with foam (manual foaming)
Remove loose and slightly adhering dirt from surfaces with the damp cleaning textile. The surface is dry immediately.
Remove loose and slightly adhering dirt from surfaces with the damp cleaning textile. The surface is dry immediately.
Select the appropriate products according to the surface to be cleaned (type/square meter) and soiling.
Put up the warning sign.
Pour the cleaning agent into the foam bottle according to the dosage instructions.
Apply a little cleaning foam to the folded microfiber cloth.
Use the moistened cloth to wipe the surface with a damp cloth. Change the dirty cloth surface in good time and moisten a fresh cloth surface with foam.
When all the cloth surfaces have been used, change the cloth.
Perform the control view.
Remove the warning sign.
Dispose of the waste.
Wash the used cloths in the washing machine.
Clean the cleaning material and replace if necessary.
Wear the protective equipment (PPE) required in accordance with the company regulations, safety data sheet or operating instructions.
Always check in advance which product meets your requirements (see Wetrok cleaning and care instructions).
Wetrok AG accepts no liability for damage caused by improper use or incorrect product selection.