Wet mopping – single work step (direct method) with wringer

Select suitable products to match the surface to be cleaned (type / square metres) and the type of soiling.

Fill the blue fresh water bucket with cleaning product in accordance with the dosing instructions (max. 2/3). Fill the green waste water bucket with water (max. 1/3) and mount the mop wringer on top.

Attach the mop correctly to the wet mopping unit.

Put up the warning sign.

Remove any loose dirt (dust-binding mopping or dry vacuum cleaning).

Immerse the mop fully in the cleaning solution (blue bucket) and then wring out thoroughly.

Start along the edges of the room and under furniture, then use the moistened mop and the wet mopping unit to mop the open space in overlapping passes.

Rinse the dirty mop if it gets dirty (green bucket), wring it out well, then continue with step1 of the main task.

Change the water and cleaning solution as needed; continue with step1 of the main task until the entire area is clean.

Perform a visual check.

Remove the warning sign once the floor covering is dry.

Wash the used mop in the washing machine.

Dispose of any waste.

Clean the cleaning materials and replace as needed.