Wet wiping with foam (manual foaming)

Toremove loose and stubborn dirt from the surface in two steps using a damp cleaning cloth. Suitable for water-resistant, smooth and slightly textured surfaces.

01

Preparatory work

  • Select suitable products to match the surface to be cleaned (type / square metres) and the type of soiling.

  • Put up the warning sign.

  • Fill the spray bottle with cleaning product in accordance with the dosing instructions.

02

Main task

  • Moisten the fittings or surface with cleaning foam and allow it to take effect without allowing it to dry out.

  • Rinse fittings and surfaces thoroughly with water.

  • Wipe down fittings and surfaces with a dry cloth. Change the cloth face when it gets dirty.

  • Replace the cloth once all sides of the cloth have been used. Dispose of the disposable cloth after use.

  • Wenn alle Tuchflächen gebraucht sind, das Tuchwechseln. Das Einwegtuch nach Gebrauch im Abfall entsorgen.

  • Perform a visual check.

03

Final steps

  • Remove the warning sign.

  • Dispose of any waste.

  • Wash the used cloths in the washing machine.

  • Clean the cleaning materials and replace as needed.

04

Comments

  • Wear the personal protective equipment (PPE) required by company regulations, safety data sheets and / or instructions for use.

  • Always check in advance which product meets your requirements (see Wetrok Cleaning & Care Instructions).

  • Wetrok AG accepts no liability for damage caused by improper use or incorrect product selection.

Download method as PDF

Weitere Methoden

To the method overview

Dust-binding dusting (disposables)

Dust-binding dusting Reusable

Damp wiping with spray

To the method overview